the description:
Modern cellar wood is a transparent primer consisting of nitrocellulosic resin and short-chain alkyd with some special additives. It is specially made for preparation to protect wooden surfac-es. It is also used as a base for plain and colored varnishes. It works to protect wood from rain, ultraviolet rays, mold and fungus and leaves it with a beautiful and semi-glossy appearance. It is used On all types of wood and furniture Advantages:
Excellent filling It is preferred for light-fruited woods
- High ability to protect from weather conditions and ultraviolet rays
- It does not affect the original wood color
- Ease of sanding
Technical Specifications:
Calour: transparent
Density: 1.0=0.05g/cm3
Solids percentage: 48 ‡ 3¾
Sandpaper: Paper No. 320
Drying time: 4-5 minutes, surface dry at 30°C
Complete dryness: 30-45 minutes at 30°C
Appearance: Semi-glossy
Per capita rate: 3-4 m 2 / kg
Application:
1- The surface must be dry, clean and free from dust, grease and ails
2- The wood should be sanded using sandpaper
No. 120 before applying the wood primer
3- The application is done with cotton or a gun, after dilution using Duco Modern thinner to reach the required viscosity for application, then sand it with sandpaper No. 320 after it is completely dry to obtain a smooth surface.
Tools: spray gun / cotton
Shelf life: Two years from the date of production if kept in a sealed container at normal tempera-
PRIMER
A high quality general primer paint that contains iron oxide to protect all iron surfaces from rust
Technical Specifications : It contains a high percentage of iron oxide, and other improvers are added that characterize this type of primer
It increases drying speed, adhesion strength, and prevents iron corrosion
Viscosity m 25= cP / at 2000 = 1000
Specific Density 1.5 = 0.1 cm/g 3
(by weight) %5 + 60 Solids content
The rate per person is 8-7 / m2 liter
Surface dry : 2 hours at 25C° = 1
Drying time, completely dry : 25 hours at 6C°= 8
Advantages:
1- The strength of adhesion. Stability and cop
2- rosion resistance
3- Ease of use and application with brush and gun
4- Ease of sanding
Usage tools
(Spray gun / roller / brush maximum) Dilution / turpentine / mineral oil
⅚0)
Tools cleaning
Cleaning turpentine / mineral oil / gasoline
DUCO COAT MODERN
the description:
Daku Modern is a fast-drying, high-gloss ni-trocellulosic product used as a final produc for cars, furniture, wood and industrial pur poses. It consists of nitrocellulosic compounds - alkyd compounds - solvents - high quality pigments and other additives.
Advantages:
- Quick drying
- High resistance to weather conditions
- Resistant to friction
- High adhesion
- Excellent mechanical properties
Technical Specifications:
Color: white, yellow, black, red, silver and customized
Density: 0.95:1.1 g/cm3
Solids percentage: 2÷55%
Drying time: 15-10 minutes for surface drying and 30 minutes for complete drying at a thickness of 6D-50 microns for dry film Coverage: 5-3m2/litre (at a dry film thickness of 30 microns)
Application:
1- The surface must be clean and free of oils and dust before painting
2- It is recommended to use a duco primer (surfacer) to establish the surface to be painted and then sand it well to obtain a smooth and flawless surface.
3- Spraying is done with a gun after dilution with Thinnerdoco Modern
Tools: spray gun
DUCO ONE
the description:
Daku Modern is a fast-drying, high-glass nitrocel-lulosic product used as a final product for cars, furniture, wood and industrial purposes. It consists of nitrocellulosic compounds - alkyd compounds - solvents - high quality pigments and other additives.
Advantages:
- Quick drying
- High resistance to weather conditions
- Resistant to friction
- High adhesion
- Excellent mechanical properties
- High gloss
Technical Specifications:
Color: white, yellow, black, red, silver and custom ized
Density: 0.95:1.1 g/cm3
Solids percentage: 2= 55%
Drying time: 15-10 minutes for surface drying and 30 minutes for complete arving at a thickness of
60-50 microns for dry film
Appearance: glossy
Coverage: 5-3m2/litre (at a dry film thickness of
30 microns)
Application:
1- The surface must be clean and free of oils and dust before painting
2- It is recommended to use a duco primer (sup-facer) to establish the surface to be painted and then sand it well to obtain a smooth and flawless surface.
3- Spraying is done with a gun after dilution with Thinnerdoco Modern
Tools: spray gun
SERVICER NC ONE
the description:
Modern Surfacer is a nitrocellulose primer designed to give quick drying and ease of sanding. It is used as a base for Duco paint in repainting cars, wood and industrial pur-poses. It consists of the finest types of resins - fillers - solvents and special additives Advantages:
Huge filling capacity
- Ease of sanding
- High adhesion
Technical Specifications :
Color: Gray or customized
Density: 0.05=1.50g/cm3
Solids content: 5 # 72%
Drying time: 10 minutes surface drying and half an hour complete drying at a thickness of 60-50 microns for a dry film at a temperature of 30° C.
Appearance: matte
Coverage: 4-3m2/L (at 6Omicron dry film thickness)
Application:
1- The surface must be clean of oils and dust before using the server. 2- By scraping without diluting, several light layers are drawn to give a flat and cohesive surface, or by spraying with a gun after diluting with Duco Modern thinner to obtain the required viscosity for spraying.
3- The surface is sanded. After total drying to obtain the desired softness
Tools: spray gun
SERVICER HIGH QUALITY ONE
the description:
Modern cellar wood is a transparent primer consisting of nitrocellulosic resin and short-chain alkyd with some special additives. It is specially made for preparation to protect wooden surfac-es. It is also used as a base for plain and colored varnishes. It works to protect wood from rain, ultraviolet rays, mold and fungus and leaves it with a beautiful and semi-glossy appearance. It is used On all types of wood and furniture Advantages:
Excellent filling
- High ability to protect from weather conditions and ultraviolet rays
-It does not affect the original wood color
- Ease of sanding
Technical Specifications:
Colour: transparent
Density: 0.05=1.0g/cm3
Solids percentage: 5 = 45%
Sandpaper: Paper No. 320
Drying time: 5-4 minutes, surface dry at 30°C
Complete dryness: 45-30 minutes at 30°C
Appearance: Semi-glossy
Per capita rate: 4-3 m 2 / kg
Application:
1- The surface must be dry, clean and free from dust, grease and oils
2- The wood should be sanded using sandpaper
No. 120 before applying the wood primer
3- The application is done with cotton or a gun, after dilution using Duco Modern thinner to reach the required viscosity for application, then sand it with sandpaper No. 320 after it is completely dry to obtain a smooth surface.
Tools: spray gun / cotton
Shelf life: Two vears from the date of production if kept in a sealed container at normal tempera-tures, away from direct sunlight
NETRO VARNISH ONE
the description:
It is a high-quality glossy nitro-cellulose varnish consisting of high-quality resins and some special additives. It is specially designed to suit all types of wood and furni-ture.
Advantages:
- High glass
Drying speed
- Extreme hardness
-Scratch resistance
Technical Specifications:
Color: transparent
Density: 0.05=0.95g/cm3
Solids: 3=25%
Drying: 10-5 minutes for surface drying, 30 minutes for complete drying
Finish: glassy
Dilution: Add 50% of Daku Modern Thinner, or until the required viscosity is reached Per capita rate: 1 liter / 6-5 square meters Application:
1- The surface must be clean and free from dust, grease, and oils.
2- Establishing wooden surfaces using modern wood sealer on two sides and sanding it using sandpaper No. 320 before coating it with (glossy) nitrocellulose varnish to obtain a smooth surface.
3- Paint the wood with engineer's stain (op-tional)
4-Using a brush or a spray gun, spray nitrocellulose varnish (shiny) after dilution with Duco Modern thinner on two sides, giving a drying time of 10-5 minutes between each laver.
Tools: spray gun/brush
SYNEHETIC VARNISH
the description:
Modern Synehetic varnish is a long alkyd product that is characterized by fast drying and a very high gloss. It also has the ability to penetrate into the surface, which gives modern varnish a high ability to adhere to all surfaces. The varnish is used as a layer of protection on wooden surfaces, windows and furniture, which gives it luster, luster and color consisting of long resins. Series - solvents - special dyes and special addi-tives.
Advantages:
- High gloss
- High adhesion
Weather resistance
- Quick drying
Technical Specifications :
Density: 0.02‡0.93g/cm3
Solids content: 2‡50%
Drying time: 2-1 hours, superficial dry
4-3 hours for complete dryness
Appearance: glossy
Per capita rate: 1 liter / 7 m2
Application:
1- Make sure the surface is clean of all impurities before painting
2- The dilution is 50% in the case of spraying with a gun and 30% in the case of brushing.
3- The surface is prepared and then applied with a modern varnish by brush or spray gun
Tools used: brush / gun
QUICK-DEYING VARNISH
the description
A transparent varnish used for painting interior wooden surfaces. It is characterized by high gloss and quick drying.
application method
It can be diluted with benzene or thinner by
(30-25%) and applied using a spray gun or brush.
dry time
dry time
Surface dry at 22°C 10-8 minutes
And complete dryness 22 hours 30 - 20 minutes coverage rate
(12-10) m 1 / 2 kg
NAPHTA
Modern naphta exclente modern naphta room
modern naphta french modern Mineral turpentine
HINNER SUPER FINISH 100/100
Ingredients: True solvent (acetate-ke-tone-ether),
activating solvent (alcohol) and diluting solvent (aromatic solvent such as toluene and xylene or TX)
Appearance: - transparent, colorless with an ether odor
degrees Celsius 180 - 110 - :Boiling point g / liter 0.89 - 0.86 - :Density
%100 - Volatile component
C°70 - :Flash point
Flammability:- This highly flammable product
should be stored and used in a well-ventilated
area away from open flames, heat and other ignition source and keep container tightly closed
Purpose: TOP COAT PU, for various polyurethane varnishes - Matte and glossy nitro-cellu-lose
finishing paints - Suitable for all types of paints with high quality
Chemical stability: - Stable under normal use
THINNER SUPER 400
Appearance: Clear, almost colourless. Hydrocarbon odor
Boiling point: - 110 - 6O degrees Celsius
Density: - 0.84 - 0.82 g / liter
Volatile component: - 100%
Flash point: - 6D°C
Flammability: - This highly flammable prod-ust should be stored and used in a good area
Ventilate away from open flames, sparks, and other sources of ignition while keeping container
Airtight
Purpose: - Doku and cleaning tools
Chemical stability: - Stable under normal use conditions
Storage conditions: - Heat and direct sum-light for a
THINNER SUPER 500
Appearance: Clear, almost colourless. Hy- drocarbon odor
degrees Celsius 10 - 7D - :Bailing point liters 91 0.82- 0.80 -Density
5⁄6100 - Volatile component C°GO - :Flash point
Flammability:- This highly flammable prod- uct should be stored and used in a
well-ventilated area away from open flame and other ignition source and keep the
container tightly closed
Purpose: - Replacement of NC Wood Sealer - Duco NC - Fast Primer
Servicer and filler
Chemical stability: - Stable under normal
THINNER SUPER 600
Appearance: Clear, almost colourless. Hy- drocarbon odor
degrees Celsius 10 - 7D - :Bailing point liters 91 0.82- 0.80-Density
5⁄6100 - Volatile component C°GO- :Flash point
Flammability:- This highly flammable prod- uct should be stored and used in a
well-ventilated area away from open flame and other ignition source and keep the container tightly closed
Purpose: - Replacement of NC Wood Sealer -" Duco NC- Fast Primer
Surfacer and Filler - Glossy and Matte Var- nishes NC
THINNER FINISH 700
Appearance: Clear, almost colourless. Hy- drocarbon odor
degrees Celsius 10 - 7D - :Bailing point liters 91 0.82- 0.80 -Density
5⁄6100 - Volatile component C°GO - :Flash point
Flammability:- This highly flammable prod- uct should be stored and used in a
NE
gsol
well-ventilated area away from open flame and other ignition source and keep the
container tightly closed
Purpose: - Replacement of NC Wood Sealer
-
NC Duco - Rapid Primer, Surfacer and Filler- NC Glossy and Matte Varnishes- • Polvester Sealer
THINNER FINISH 900
Ingredients: True solvent (acetate-ke-
tone-ether), activating solvent (alcohol) and d-i luting solvent (aromatic solvent such as toluene and xylene or TX)
Appearance:- transparent, colorless with an ether odor
degrees Celsius 180 - 10 - Boiling point
g / liter 0.89 - 0.86 - :Density 1⁄4100 -Volatile component
C°7D -:Flash point
Flammability:- This highly flammable product should be stored and used in a well-ventilated
area away from open flames, heat and other gi- nition source and keep container tightly closed Purpose: TOP COAT PU, for various polyure-
thane varnishes - mat and glossy nitro-cellu- lose finishing paints
Chemical stability: - Stable under normal use conditions
MODERN PLUS COATING -transformed - Copy.jpeg)
.jpg)
-transformed - Copy.jpeg)
.jpg)
.jpg)
-transformed - Copy.jpeg)
